document number: 42033 revision 17-nov-03 www.vishay.com 98 type 131p vishay sprague for technical questions, contact spresale@vishay .com features suggested replacement for type 196p moderate cost small size high peak current ratings high corona starting voltage dc life test: 140% of rated voltage for 250 hours @ + 125 c. no open or short circuits. no visible damage. maximum capacitance change: 5%. minimum ir = 60% of initial limit. maximum df = 1.0%. moisture resistance: mil-std-202, method 106e, 10 cycles. no visible damage. maximum capacitance change: 3%. minimum ir = 60% of initial limit. maximum df = 1.2%. thermal shock and immersion cycling: no visible damage. maximum capacitance change: 1%. minimum ir = 50% of initial limit. maximum df = 1.2%. 0.010 0.022 0.047 0.10 0.22 0.47 131p103x9600s02* 131p223x9600s02* 131p473x9600s02* 131p104x9600s02 131p224x9600s02 131p474x9600s02 0.312 x 0.875 [7.92 x 22.23] 0.400 x 0.875 [10.16 x 22.23] 0.400 x 1.375 [10.16 x 34.93] 0.562 x 1.375 [14.27 x 34.93] 0.670 x 1.625 [17.02 x 41.28] 0.750 x 2.375 [19.05 x 60.33] 0.037 0.058 0.085 0.149 0.354 0.656 1.5 3.3 7.0 15.0 33.0 70.0 0.025 0.041 0.059 0.104 0.247 0.459 1.0 2.3 4.9 10.5 23.1 49.0 ordering information * all standard inventoried part numbers will be stocked in terminal and case style number s04. 1000 wvdc / 500 vac 0.010 0.022 0.047 0.10 0.22 0.47 131p103x91k0s02* 131p223x91k0s02* 131p473x91k0s02* 131p104x91k0s02* 131p224x91k0s02* 131p474x91k0s02* 0.400 x 0.875 [10.16 x 22.23] 0.400 x 1.375 [10.16 x 34.93] 0.562 x 1.375 [14.27 x 34.93] 0.670 x 1.625 [17.02 x 41.28] 0.750 x 2.125 [19.05 x 53.98] 1.000 x 2.375 [25.40 x 60.33] 0.039 0.079 0.133 0.241 0.427 0.772 2.5 5.5 11.0 25.0 55.0 117.0 0.027 0.055 0.093 0.168 0.298 0.540 1.7 3.8 7.7 17.5 38.5 81.9 performance characteristics operating temperature: - 65 c to + 125 c. capacitance range: 0.01 f to 0.47 f. capacitance tolerance: 20%, 10%, 5%, 2%. voltage rating: 600 wvdc to 1000 wvdc. dissipation factor: 1.0% maximum. voltage test: 200% of rated dc voltage for 2 minutes. insulation resistance: at + 25 c: 20,000 megohm - microfarads or 30,000 megohm minimum. at + 125 c: 20 megohm - microfarads or 250 megohm minimum. capacitance change with temperature: at - 65 c, - 10% typical. at + 125 c, + 10% typical. standard ratings in inches [millimeters] part number 10% tolerance capacitance ( f) nominal case size d x l max. rms current @ + 85 c max. peak current @ + 85 c max. rms current @ + 125 c max. peak current @ + 125 c physical characteristics lead pull: 5 pounds (2.3 kilograms) for one minute. no physical damage. lead bend: after three complete consecutive bends, no damage. lead wire: bare, solid tinned wire. case diameters: .312" [7.92mm], no. 22 awg; .400" [10.16mm] and over, no. 20 awg. marking: sprague ? trademark, type or part number, capacitance and voltage. 131p type this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. values must conform to the decade rating for the tolerance specified. 103 capacitance x9 capacitance tolerance x0 = 20% x9 = 10% (inventoried) x5 = 5% x2 = 2% 600 dc voltage rating this is expressed in volts. (1000 wvdc coded as 1k0) s = wire leads t = soldering tab* s terminal note: inventoried items are all s04. 04 case style * soldering tabs are available only on case diameters equal to or greater than 0.400" [10.16mm]. consult the factory for special case styles and terminal configurations. environmental characteristics vibration test (condition b): no mechanical damage, short, open or intermittent circuits. film snubber capacitors metal-case, paper/polyester, dielectric extended foil electrodes 600 wvdc / 370 vac
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
